By Othon Jarle
There’s no denying just how important your well pump is for your entire well system’s overall functionality, as well as your property’s long-term source of clean, fresh water.
But just like with any technological piece of equipment, well pumps often need to be repaired or replaced every now and again—and this scenario is often neglected by homeowners who are afraid of the costs associated with well pump installations.
This is why we’ve partnered with the pump installation bellefontaine oh experts at Eaton Drilling & Pump to provide this list of the five most common red flag warning signs that indicate a homeowner’s need for a new well pump.
So, if you have a well water system at your property and you’re concerned about what’s going on with your system’s pump, check out the below sections to learn more about when it’s time to invest in a new one!
How Long Do Well Pumps Typically Last?
One of the first things that well system owners need to remember is that well pumps don’t last forever, so you should know how old yours is and how much longer you might have until you’ll inevitably need a replacement.
Even when you take great care of your well pump and invest in routine maintenance on a yearly basis, the odds are that your pump will need to be replaced around every 10-15 years.
However, it’s also normal for some properties to go upwards of 20-30 years before needing a new well pump. So, well pump durability can drastically vary depending upon the type of well pump you own and your household’s unique characteristics!
Five Red Flags That You Need A New Well Pump Installation At Your Home In Bellefontaine, Ohio
Although there are many red flags oriented around needing a new well pump system, below are five of the most common scenarios that occur throughout the Bellefontaine, Ohio area:
Red Flag #1: No Water Coming From The Well Pump
If you’re noticing little to no water coming out of your faucets when you turn them on or very little water flushing from your toilets, then it’s a serious red flag warning sign that something is wrong with your property’s well system.
Although it’s possible to troubleshoot this dilemma and potentially repair the pump, it’s also possible that you might need to invest in a new well pump installation in order to get your system back to its normal functionality.
However, keep the following troubleshooting steps in mind prior to resorting to a new pump installation:
- Double-check your well system’s circuit breaker to make sure that everything is getting enough electrical power. Try turning the pump fully off, resetting its breaker, and then turning the pump back on.
- Try verifying your pressure tank’s efficiency by shutting it off and resetting it.
- Consider the possibility of a plumbing system failure, including potential pipe damages that might be impacting your well pump.
- Droughts can often impact a property’s well system.
Red Flag #2: Water Pressure Decreases
It’s also common for well system owners to periodically recognize water pressure decreases when things are awry with well pumps. Low water pressure is a red flag that your pump is not quite as capable of drawing up water into your plumbing like it used to, which could be an early sign that the pump is beginning to fail.
This type of dilemma can also indicate that a household’s well pump is too small for their water usage needs. This could also be the result of a home installing new water features like a dishwasher, a new bathroom, or installing a new water heater.
Some of the typical causes of low water pressure in well systems include:
- Well pump mechanism failures
- Pressure tank holes
- Bacteria buildup
Red Flag #3: Faucets “Spitting Out” Air
If you’re noticing air bubbles coming with your water supply when you turn on faucets, it’s a sign that your property’s water isn’t flowing consistently like it’s supposed to. This is often an indication that something is wrong with a well pump, because it shows that the pump is working much harder than normal.
Just like with abnormal low water pressure, air spurts coming from your faucets are a sign that your well pump is beginning to fail or has temporarily lost its full functionality. Some of the common reasons for this dilemma include:
- Pipe cracks have formed near your well pump, which will require a comprehensive repair or installation appointment.
- Your property’s water table has dropped slightly below your well pump, or you well is beginning to run dry. This could mean that you need to re-install your well pump to ensure that it’s deeper and can provide more consistent water.
Red Flag #4: Your Well Water Looks Dirty
Any kind of sulfur-like smells or metallic tastes coming from your well water are never good signs, and this is particularly the case if dirt or other sediment is showing up within your property’s water supply as well.
This red flag indicates an immediate need for a repair or installation appointment, and the odds are that the dilemma is being caused by your system’s pump. It’s possible that you might need a new pump if your current one is too large for your system, and it’s also possible that your well pump will need to be relocated to resolve the dirty-looking water.
Red Flag #5: Your Well Pump Is Constantly Running
It’s also troubling when your well pump is seemingly running on a constant basis, because this can very quickly wear the pump down and lead to far worse issues. In most scenarios, this type of dilemma will require a new pump installation, but it depends upon the type of well system you own.
It’s also possible that your pressure control switch is malfunctioning, that a pipe within your well system is leaking, or that your pump has essentially worn itself down and is no longer capable of generating the amount of water pressure that it needs to pull water up into your plumbing system.
Reach Out To Eaton Drilling & Pump When You Need Well Pump Installation Services In Bellefontaine OH!
Every home needs a reliable source of clean water, and this can sometimes be easier said than done for properties with well water systems.
Whenever well pump malfunctions occur, it can be a troubling scenario for households. And although well pump repairs are possible, there are many scenarios in which it makes more sense for people to invest in a new well pump installation instead of going through inevitable repair issues for long periods of time.
One of the best well pump installation teams in the Bellefontaine OH area is Eaton Drilling & Pump, and you can let their team of technicians know what you’re currently experiencing with your well pump when you click on the link to their website that’s at the beginning of this article!
